5 min read
How To Prepare for X-Ray Machine Installation
Any time your facility purchases X-ray equipment, there are some big, important steps that need to be taken before it...
2014 GE Precision 500D (EQ-004225)
Quad-Mode Image Intensifier
Digital System
3-Phase Generator 480 VAC
MX100 Overhead X-Ray Tube
Chest Bucky
Tilting Table Option
DICOM Print Option
Pulse Fluoro
Virtual Collimator
12 bit CCD Camera
Autoex
Brightness control and extended Dynamic Range
2010 GE Precision 500D (EQ-023401)
Quad-Mode Image Intensifier
Digital System
3-Phase Generator 480 VAC
MX100 Overhead X-Ray Tube
Chest Bucky
Tilting Table Option
DICOM Print Option
Pulse Fluoro
Virtual Collimator
12 bit CCD Camera
Autoex
Brightness control and extended Dynamic Range
2016 GE Precision 500D (EQ-023687)
Quad-Mode Image Intensifier
Digital System
3-Phase Generator 480 VAC
MX100 Overhead X-Ray Tube
Chest Bucky
Tilting Table Option
DICOM Print Option
Pulse Fluoro
Virtual Collimator
12 bit CCD Camera
Autoex
Brightness control and extended Dynamic Range
2013 GE Precision 500D (EQ-023585)
Quad-Mode Image Intensifier
Digital System
3-Phase Generator 480 VAC
MX100 Overhead X-Ray Tube
Chest Bucky
Tilting Table Option
DICOM Print Option
Pulse Fluoro
Virtual Collimator
12 bit CCD Camera
Autoex
Brightness control and extended Dynamic Range
2016 GE Precision 500D (EQ-025012)
Quad Mode Image Intensifier
3-phase generator
MX100 overhead x-ray tube
tilting table option
DICOM
Print Option
Fluoro Virtual Collimator
12 bit CCD camera
Flashpad Detector
Contact us for information!
Use this step-by-step guide to start your R/F room project.
May 10, 2024 by Danny Fisher
Any time your facility purchases X-ray equipment, there are some big, important steps that need to be taken before it...
Aug 6, 2020 by Clay Selby
We emphasize preventive maintenance (PM) a lot here at Block Imaging. We type about it in emails. We talk about it on...
Mar 16, 2023 by Clay Selby
Bringing a new (or new to you) X-ray system into an imaging facility can be an overwhelming project, especially if...